HC vs HCS: Non-Siliconized Hollow Conjugated Fiber Buyer Guide

When buyers search for filling fiber, most of the attention goes to siliconized HCS. But for many wadding, padding and nonwoven lines, the better choice is non-siliconized hollow conjugated fiber, often called HC fiber, dry hollow fiber or HCNS. Wuxi Southern Yangtze Textile Co., Ltd produces both finishes in 3D, 7D and 15D, usually cut at 32mm and 64mm, so we are often asked a simple question: should I buy HC or HCS? This guide explains the difference in plain terms.

What Is Non-Siliconized Hollow Conjugated Fiber?

Hollow conjugated fiber is a polyester staple fiber made from two components spun together. Because the two components shrink differently, the fiber forms a permanent three-dimensional spiral crimp. The hollow channel inside each fiber adds bulk and warmth with less weight. Together, the 3D crimp and the hollow core give the fiber its loft and recovery.

The only difference between HCS and HC is the surface finish:

  • HCS (hollow conjugated siliconized fiber) carries a silicone finish. The fiber feels smooth and slippery, often called "slick fiber". It opens easily and spreads evenly inside a pillow or cushion.
  • HC (hollow conjugated non-siliconized fiber) has no silicone finish. The surface is "dry", with more fiber-to-fiber friction and grip.

Same polymer, same hollow structure, same crimp. The finish changes how the fiber behaves on your machines and inside the finished product.

When HC Fiber Is the Better Choice

Because non-siliconized fiber grips instead of sliding, it is usually preferred where fibers need to hold together:

  1. Thermal bonded wadding. HC is commonly blended with low-melt binder fiber. Without silicone on the surface, the melted binder holds the web better, so the wadding is less likely to separate.
  2. Needle-punched nonwovens and felts. Higher friction helps the needles lock fibers into a stable mat for padding, interlinings and technical felts.
  3. Spray-bonded and quilted padding for mattresses, sofas and garment insulation, where the batt must keep its shape during cutting and sewing.
  4. Firm furniture fill and blends where a less slippery, more supportive feel is wanted.

HCS remains the usual choice for loose filling: pillows, duvets and comforters, cushions, plush toys and fiber balls, where softness and easy blowing through a filling machine matter most.

Choosing Denier and Cut Length

Denier sets the feel and support of the fill:

  • 3D gives a finer, softer hand, suitable for lighter wadding and soft padding.
  • 7D is the general-purpose grade for wadding, quilts and cushions.
  • 15D is a coarser, stiffer fiber that gives more support and recovery for furniture, mattress and heavy padding.

Cut length should match your equipment. Short cuts such as 32mm suit carding lines and fiber ball machines, while 64mm is commonly used for carded wadding and coarse filling equipment. Wuxi Southern Yangtze Textile Co., Ltd usually supplies 32mm and 64mm; tell us your machine and end product and we will suggest a combination for trial.

A practical tip: many factories run both. They use HCS for the inside of pillows and cushions, and HC for the bonded wadding layers in the same mattress or quilt. If you do both, buying from one fiber maker keeps denier, crimp and color consistent across your product line.

How to Order HC or HCS Fiber

To get a quick and accurate offer, send us:

  • Finish: HC (non-siliconized) or HCS (siliconized)
  • Denier and cut length, for example 7D x 64mm HC
  • End use: thermal bonded wadding, needle punch, pillow filling, toy stuffing, etc.
  • Monthly quantity and destination port

We operate two chemical fiber production lines covering deniers from 0.7D to 150D, with an annual capacity of about 30,000 tons, and we have around 15 years of experience in polyester fiber. You can see our hollow fiber range on the 3D hollow conjugated fiber page, the 15D HCS fiber page and the recycled hollow conjugated PSF (HCS) page.

FAQ

What is the difference between HC and HCS fiber?

Both are hollow conjugated polyester staple fibers with a 3D spiral crimp. HCS has a silicone finish for a smooth, soft, slippery hand; HC has no silicone, so it has more grip and bonds better in wadding and nonwovens.

Which is better for thermal bonded wadding, HC or HCS?

Non-siliconized HC is usually preferred, because the binder fiber holds a dry fiber surface better. Always confirm with a trial on your own line and blend ratio.

What sizes of hollow conjugated fiber does Wuxi Southern Yangtze Textile Co., Ltd offer?

We offer HC and HCS in 3D, 7D and 15D, usually in 32mm and 64mm cut lengths. Contact us for samples.

Contact: WhatsApp / Mobile +86-18800588573 | Email: sales@syfiberyarn.com