Black Polyester Staple Fiber Sample Checklist for OE and Ring Mills
Before a spinning mill switches supplier or approves a new lot, it usually asks for a sample. A good black polyester staple fiber sample check saves a lot of trouble later, because problems with black fiber tend to show up only after the yarn is knitted or woven. Wuxi Southern Yangtze Textile Co., Ltd makes 1.4D dope dyed black PSF for spinning, mainly 1.4D x 38mm, with 44mm and 51mm occasionally. This checklist sets out the questions to ask and the points to compare when you evaluate a black PSF sample for open-end (OE) or ring spinning. Your own yarn count, machines and customers set the limits.
What to Ask For with a Black Polyester Staple Fiber Sample
Ask these questions before the sample is shipped:
- Which grade is it? Virgin or recycled, and spinning grade or nonwoven grade. Both look alike in a bale.
- Which specification? Denier and cut length, written as D x mm, for example 1.4D x 38mm.
- Is it from regular production? A sample taken from a current production lot tells you more than a specially prepared one.
- Which lot does it come from? Ask for the lot number so a later bulk shipment can be compared with it.
- What test data comes with it? Ask which properties the supplier measures for each lot, and request a lot test sheet or technical data sheet if one is available.
Points to Compare on the Sample
Denier and cut length
Check that the actual fineness and length match the stated specification. Mixed or uneven lengths, and over-length fibers, cause problems in opening, carding and drafting.
Blackness and shade consistency
Compare the sample with your current fiber or approved reference, in daylight and under your normal inspection light. Check for brown, grey or blue undertones and for lighter patches inside the tuft. With dope dyed black PSF, the color is added to the polymer melt, so ask how shade is kept stable from lot to lot and what the supplier compares each lot against. If your yarn goes into black melange or blends, also check the shade after a small blending trial.
Spin finish and handle
Spin finish affects static, fly and how the fiber passes through carding. Ask whether the finish is chosen for cotton-system spinning and whether it stays the same between lots.
Defects and cleanliness
On black fiber, every white fiber, fused lump or hard end is easy to see in the yarn. Pull several small tufts apart and look for fused fibers, hard or uncut pieces, foreign fibers and dust.
Bale information
Ask what is printed on each bale: product name, specification, grade, lot number and weight. Clear bale labels make it easier to blend bales in a laydown and to trace any problem back to a lot.
OE and Ring Spinning: Different Priorities
The same 1.4D x 38mm black PSF runs on both systems, but mills watch different things.
- Open-end (rotor) spinning: cleanliness, dust and how the fiber opens matter most, because trash and fused fibers can collect in the rotor.
- Ring and compact spinning: fineness evenness, length uniformity and low short-fiber content matter more, especially for finer counts. Drafting behavior shows up in yarn evenness and hairiness.
The best test is always a trial on your own line: run the sample, then compare carding, breaks and the finished yarn with your current fiber.
After Approval: Keep a Reference
Keep part of the approved sample, and a yarn made from it, as your reference, and compare every bulk lot against it.
To ask for a black PSF sample, send us your spinning system, yarn count, denier and cut length, virgin or recycled grade, and your current fiber or a reference sample if you have one. See our 1.4D dope dyed black polyester staple fiber, 1.4D x 38mm recycled black PSF for ring and vortex and 1.2D x 38mm recycled black PSF for fine count spinning pages. Our articles on black PSF for open-end spinning and spinning grade vs nonwoven grade, and the full fiber for spinning range, give more background.
About Wuxi Southern Yangtze Textile Co., Ltd
Wuxi Southern Yangtze Textile Co., Ltd is a polyester staple fiber manufacturer in Jiangyin, Wuxi, with about 15 years of experience. Two fiber production lines cover 0.3D to 150D, with an annual capacity of 30,000 tons. Our spinning range includes virgin and recycled dope dyed black PSF.
FAQ
Q: What should come with a black PSF sample?
A: The grade (virgin or recycled), the specification in D x mm, the lot number, and any lot test data the supplier keeps, so you can compare the sample with later bulk lots.
Q: How do I check blackness on a sample?
A: Put it beside your current fiber or approved reference, in daylight and under your normal inspection light, and look for undertones and lighter patches. A small blending or spinning trial shows the shade best.
Q: Is 1.4D x 38mm black PSF suitable for both OE and ring spinning?
A: Yes, 1.4D x 38mm is the standard cotton-system specification for both. A trial on your own line is the best way to confirm it suits your counts.
For a sample or a quotation, contact us by WhatsApp / Mobile: +86-18800588573, or email sales@syfiberyarn.com.